Wick Centering Tool

A 3D-printed guide that holds your wick in the center while the wax sets.

Fits

40-85 mm jars

Steps

1 or 2 mm

Material

PLA

Ships in

1-2 business days

Which one?

• Openings 40 to 60 mm: 2 mm increments
• Openings 61 to 85 mm: 1 mm or 2 mm
• Both work on most jars

What it does

A wick that leans looks bad and burns unevenly. This tool holds the wick in the center of the jar while the wax cools and sets. It fits jar openings from 40 to 85 mm, so it covers most candle jars. It is 3D printed in PLA on our Bambu Lab X1 Carbon.

Three styles

Choose 1 mm increments or 2 mm increments, or the flat type, which has an 85 mm outer diameter. Colors are beige, black and white. The price depends on the style, and the page shows it when you choose.

How to measure your jar

Measure the inside of the opening in millimeters, across the widest point. Match it to the range above: 40 to 60 mm suits the 2 mm style, and 61 to 85 mm suits the 1 mm or 2 mm style.

Who it is for

Home candle makers pouring a first batch. Small candle makers who pour many jars. Anyone who wants every candle to look clean. Our guide how to center a candle wick walks through the pour.

Care

PLA softens in heat. Pour wax at the temperature your wax maker recommends, and lift the tool off after the wax has set. Do not leave it on a hot jar or near a flame. Wipe wax off with a dry cloth once it has cooled.

Want it customized?

If your jar size is unusual, or you need a quantity for a workshop or shop, message us. We confirm the price before you pay. See also bulk orders.

Does it fit my jar?

It fits openings from 40 to 85 mm. Measure the opening, then pick the style that matches.

Also on Shopee: see this item on our Shopee store.